1984 Corvette: GM TechLink: Rear Spindle Support Rod Protector Sleeve
Estimated Reading Time: < 1 Minute Model Year: 1984
Subject: Rear Spindle Support Rod Protector Sleeve
Source: Chevrolet Service News
Number: 2, Volume 56, Page 3
Date: March/April 1984
The Rear Spindle Support Rods, along with a protector, may be used to support the rear end of the 1984 Corvette when using a twin post hoist to raise the vehicle.
A protector for the spindle support rods may be fabricated as shown in Fig. 1 to prevent surface nicks or gouges where the lifts contact the rods.
