1984 - 1985 Corvette: Service Bulletin: Corvette Door Trim Panel Moldings
Estimated Reading Time: 1 MinutesModel Year: 1984-1985
Subject: Door Trim Panel Upper Garnish Molding
Source: Chevrolet Dealer Service Information Bulletin
Number: 85-136, Section 10
Date: Oct., 1985
To: All Chevrolet Dealers
The side front door trim panel assembly has been replaced when only the garnish molding needed replacement. To correct this needless replacement of panel assemblies, upper garnish molding are now available.
| P/N | Part Name |
|---|---|
| 14094585 | Molding - Door Trim Panel Upper Garnish (L.H.) |
| 14094586 | Molding - Door Trim Panel Upper Garnish (R.H.) |
To replace garnish molding, remove the door trim panel per instructions in Corvette Shop Manual.
Labor Time: .5 hours each side
Chevrolet Motor Division
General Motors Corporation
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.