By John Hinckley, Corvette Enthusiast MagazineUsed here with permission.Copyright John Hinckley, Corvette Enthusiast MagazineThe objective of this article is to take you through a radiator replacement and to share some tips and techniques that will... Read More
Engine - Drivetrain
Subject: Fuel Gauge System Diagnosis Model and Year: 1967 Corvette Source: Chevrolet Technical Service Bulletin Bulletin Number: DR #752, Section VIII Date: July 19, 1965 TO: ALL CHEVROLET DEALERS This bulletin is... Read More
Subject: Drive Line Noise Model and Year: 1963 - 1965 Corvette Source: Chevrolet Technical Service Bulletin Bulletin No: #1069 Section: IV Date: January 7, 1965 TO: ALL... Read More
Subject: Corvette Radiator Lower Hose ReplacementModel and Year: 1963 - 1964CorvettesSource: Chevrolet Service NewsNumber: Volume 36, Number 2Date: February 1964, Page 3 When replacing the radiator outlet (lower) hose on... Read More
A chassis and powertrain lubrication chart for 1963-1964 Corvettes - document attached below. Read More
By John Hinckley, Corvette Enthusiast MagazineUsed here with permission.Copyright John Hinckley, Corvette Enthusiast MagazineMany of us really enjoy the sound (and performance) of solid lifters, but some folks don’t look forward to the... Read More
1957 - 1965 Corvettes built with either a 283 or 327 cu. in. engine fall under this factory service bulletin. This information of fitting main and rod bearings to factory specs should be helpful to anyone performing a restoration on one of these... Read More
Below is an excellent source of information from a 1965 Corvette fuel injection repair kit #7017297. There were four different kits available other than the #7017297 kit in 1965. Read More
Subject: New Fuel Injection Services Kits Available Model and Year: 1957 - 1963 Corvette Source: Chevrolet Service News Date: December, 1962 - Volume 34 - Number 11 In response to numerous requests from Chevrolet dealer... Read More
Model Year: 1956-1968Subject: Connecting Rod Bolt UsageSource: Chevrolet Service NewsDate: August, 1968A new connecting rod assembly incorporating a 7/16" diameter connecting rod bolt is being used in late built Corvette R.P.O. L-88 (427 cu. in., 430... Read More