Chassis, Frame and Suspension

Subject: POWER STEERING SHUDDER/GROAN INSTALL P/S COOLER & HOSE Model and Year: 1988-90 CORVETTE WITH 5.7L ENGINE Source: Chevrolet Service Bulletin Bulletin Number: 90-376-3B - (10/25/1990) Condition: Some 1988-90 Y-cars with either... Read More

Subject:     Rear Wheel Tie Rod Model and Year:  1988-89 Chevrolet Corvette Source:   Product Safety Campaign / Chevrolet Dealer Product Campaign Bulletin Bulletin No:  89C17 Section:  3D ... Read More

Subject: Revised Differential Case Cross Pin Installation Procedure Model and Year:  1985 Corvette Source:  Chevrolet Service News Page Number:  NA Date:  March/April 1985 - Volume 57 - Number 2 Figure 4B-39 shown on... Read More

Model Year: 1984 Subject: Revised body Paint Plate Information Location Source: Chevrolet Service News Number: 2, Volume 56, Page 9 Date: March/April 1984 Location of Point "F" is incorrectly show on Figure 2D-2, Section 2D of the... Read More

Source: Chevrolet Dealer Service BulletinNumber: 84-223Section: 3D (IV)Date: Dec., 1984Subject: Ride Harshness - Z51 SuspensionModel Year: 1984 CorvetteTO: ALL CHEVROLET DEALERSRide harshness associated with the Z-51 suspension option may be a source... Read More

Subject: RACK/PINION POWER STEERING VALVE RING SERVICE Model and Year: 1981-84 CHEVETTE, 1982-84 CAVALIER, CELEBRITY, CITATION AND 1984 CORVETTE Source: Chevrolet Service Bulletin Bulletin Number: 84-74 - (06/02/1984) This bulletin... Read More

Subject: REAR AXLE DIFFER- ENTIAL CROSS SHAFT RETENTION Model and Year: 1984 CHEVROLET CORVETTE MODELS Source: Chevrolet Campaign Bulletin Number: 84-C-25 - (09/20/1985) TO: ALL CHEVROLET DEALERS The National Traffic and Motor Vehicle... Read More

Model Year: 1984 Subject: Rear Spindle Support Rod Protector Sleeve Source: Chevrolet Service News Number: 2, Volume 56, Page 3 Date: March/April 1984 The Rear Spindle Support Rods, along with a protector, may be used to support the... Read More

Subject: Axle Lube Change Model and Year: 1984 Corvette Source: Chevrolet Service News Page Number: Page 1 Date:  September/October 1983 - Volume 55 - Number 5 Due to the reduced size of the differential housing on the above models,... Read More

Putting polyurethane bushings on your late-model Corvette pays off with better ride and handlingby David Fulcher aka David-F   So, you have a late-model Corvette and you want to go racing. Or maybe you just want it to feel better on those... Read More