Subject: Air Gaps - Corvette Folding Top-To-Body Panel
Model and Year: 1963 - 1965 Corvette
Source: Chevrolet Technical Service Bulletin
Bulletin Number: TSB #1097, Section I
Date: February 11, 1965
TO: ALL CHEVROLET SERVICE PERSONNEL
Corvettes, with folding top, may exhibit excessive gaps between rear bow weatherstrip and body panel in right and left rear quarter areas. These gaps are frequently sufficient to permit objectionable air and water entry and may be encountered on 1963-64 and early 1965 units.
A new weatherstrip which incorporates a seal with 1/4" greater height entered production effective with Serial #S108326.
Field complaints on this condition can be corrected by installation of the new weatherstrip, Part No. 3873761, per attached instructions.
Corvette Convertible Weather Seal Replacement
The rear bow weatherstrip is retained in the bow by the installation of a filler cord which causes the upper bead of the weatherstrip to expand within the retainer channel (Figure 1).
PARTS DATA
Part No: 3873761
Quantity: 1
Description: Weatherstrip, Rear Bow
Article ID: 1218
Created: June 21, 2015
Last Updated: June 21, 2015
Online URL: https://www.corvetteactioncenter.com/tech/knowledgebase/article/1963-1965-corvette-service-bulletin-air-gaps-corvette-folding-top-to-body-panel-1218.html