Subject: Power Steering Bracket
Model and Year: 1968 Corvette with 427 cu. in. Engine
Source: Chevrolet Dealer Service Technical Bulletin
Bulletin Number: 68-T-46, Section IX
Date: Apr. 25, 1968
TO: AL CHEVROLET DEALERS
Some reports of power steering pump rackets cracking and/or breaking have been received on 1968 Corvettes equipped with 427 Cu. In. engine.
Effective in production since late March, a redesigned bracket has been used to correct the above condition.
In service when cracked or broken power steering pump brackets are encountered, they should be replaced with the following:
|
PART NO. |
DESCRIPTION |
QUANTITY |
| 3946000 | Brace | 1 |
| 3946002 | Bracket | 1 |
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.
© Copyright General Motors Corporation. All Rights Reserved
Article ID: 183
Created: July 13, 2014
Last Updated: July 13, 2014
Online URL: https://www.corvetteactioncenter.com/tech/knowledgebase/article/1968-corvette-service-bulletin-power-steering-bracket-183.html