1997 - 2002 Corvette: Service Bulletin: Driver Seat Movement During Acceleration and Braking (Replace Adjuster Assembly)

Subject: Driver Seat Movement During Acceleration and Braking (Replace Adjuster Assembly)
Source: Chevrolet Dealer Technical Service Bulletin
Number: 02-08-50-002
Date: April 2002

Models: 1997-2002 Chevrolet Corvette with Power Seats (RPO AG1 or AG2) Built Prior to VIN Breakpoint 25106379

Condition: Some customers may comment on excessive movement in the driver seat during vehicle acceleration and braking.

Correction: A new seat adjuster assembly has been released to correct this condition. Replace the adjuster assembly. Refer to Front Seat Adjuster Replacement (SI Document ID# 656483) in the Seats sub-section of the Service Manual.

Parts Information:

Part Number	Description
88953528	Adjuster, D/Seat (w/o memory)
88953529	Adjuster, D/Seat (w/memory)

Warranty Information:

For vehicles repaired under warranty, use:

Labor Operation	Description	Labor Time
C6041	Adjuster Assembly, Front Seat Power -- Replace (Driver)	Use published labor operation time

GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.

Article ID: 379
Created: July 21, 2014
Last Updated: July 21, 2014

Online URL: https://www.corvetteactioncenter.com/tech/knowledgebase/article/1997-2002-corvette-service-bulletin-driver-seat-movement-during-acceleration-and-braking-replace-adjuster-assembly-379.html