Subject: Corvette Hood Support Safety Hole
Model and Year: 1964 Corvette
Source: Chevrolet Service News
Page Number: 1
Date: January 1964, Volume 36, Number 1
Some early 1964 Corvettes have been built with the hood support safety hole through only one side of the hood support. This problem is easily corrected. First, raise the hood until it locks in the open position; then drill the 19/64" safety hole using the hole in the support lower half as a guide.
Article ID: 898
Created: September 17, 2014
Last Updated: September 17, 2014
Online URL: https://www.corvetteactioncenter.com/tech/knowledgebase/article/1964-corvette-service-news-corvette-hood-support-safety-hole-898.html