Subject: Clutch Master Cylinder Push Rod Bushing
Model Year: 1986 - 1987 Corvette with Manual Transmission
Source: Chevrolet Dealer Service Bulletin
Bulletin No: 87-114, Section 7C
Date: April, 1987
TO: ALL CHEVROLET DEALERS
Some 1986 or 1987 Corvettes with manual transmissions may experience inadequate retention of the clutch master cylinder push rod attachment.
If the condition exists, remove the plastic bushing from the master cylinder push rod and replace with the following service parts. (Refer to Figure 1):
| DESCRIPTION | PART NUMBER |
| Bushing | 14080233 |
| Flat Washer | 120395 |
| Retainer | 148149 |
Use applicable Labor Time and Operation Number.
Chevrolet Motor Division
General Motors Corporation
Article ID: 904
Created: September 18, 2014
Last Updated: September 18, 2014
Author: Rob Loszewski
Online URL: https://www.corvetteactioncenter.com/tech/knowledgebase/article.php?id=904